PLASMA POWER SOURCE SIBIR 140PR
Go back to the catalogue
Plasma cutting machine SIBIR 140 PR has non-contact ignition and is designed to cut carbon, alloyed steels and alloys of non-ferrous metals of 50 mm.
SIBIR 140PR provides high cutting speed and stay low budget solution due the lack of necessity to use the containers with oxygen and fire gases.
The machine can be used at temperature of – 40 °C.
- Plasma torch Trafimet Ergocut A141 (6m) – 1 unit
- Ground clamp with cable – 1 unit
- Filter regulator (EW2000-2) – 1 unit
- CEE plug – 1 unit
- Hitch – 1 unit
- Air hose (up to -40 °C) – 5 m.
- Spring nozzle CV0011 – 1 unit
- Roll nozzle CV0021– 1 unit
- Dust filter G2 class – 4 units
- Nozzle PD0101-17 – 5 units
- Electrode PR0101 – 5 units
- Plasma power source SIBIR 140 PR – 1 unit
Plasma cutting machine SIBIR 140 PR has non-contact ignition and is designed to cut carbon, alloyed steels and alloys of non-ferrous metals of 50 mm.
SIBIR 140PR provides high cutting speed and stay low budget solution due the lack of necessity to use the containers with oxygen and fire gases.
The machine can be used at temperature of – 40 °C.
- Supply voltage - 380±15% V
- Current regulation range - 35-140A
- Max. thickness of the metal - 50 mm.
- Rated power input – 26kW
- Open-circuit voltage – 280V
- Operating voltage - 145 V
- Frequency of the supply network - 50 Hz
- Load duration (with a filter)- 60 (40)%
- Protection level – IP23
- Operating ambient temperature -40…+40 °С
- Overall dimensions – 400x250x270 mm
- Working pressure of the compressor - 4.5-5 atm
- Air consumption - 230 l/min
- Net weight – 24 kg
Please contact our sales team by e-mail sales@sibirsvarka.ru or by phone +7 800-775-4056.
Please contact our sales team by e-mail sales@sibirsvarka.ru or by phone +7 800-775-4056.